contact

You can contact me using the form below

14 Comments to “contact”

  1. melchor | January 27th, 2009 at 10:21 am

    hi sir gud day, im melchor frm philippines i have a favor to you can i ask a antenna design directional 5 elements thank you hope you give a favor

  2. Jeremy Bem | January 31st, 2009 at 2:58 am

    Hi!

    I found you by googling for “site:name.my geek”. In other words, I was looking for some friendly and geeky individual in Malaysia, which, well, maybe I found :)

    My specific reason for contacting you is that I am trying to buy the domain name “jere.my”, but it sounds like maybe the registrant needs to be in Malaysia. If it comes to that, might I be able to transfer it to you and you’d let me use it?

    Since your url also uses the namespace in a cute way, maybe you’ll be sympathetic :)

    -Jeremy (USA, work at google)

    ps. I just joined dreamhost too! And agree it looks great.

  3. tips | April 21st, 2009 at 4:37 am

    Please let me know if there are any equally great sites like this you can recommend to me. Thanks Again

  4. Tim Schumacher | May 1st, 2009 at 4:11 am

    Hi, I would like to make the 2 meter antenna out of rabbit ears but I couldn’t tell by the picture how the coax is connected. Is one side the center of the coax and the other side the sheild that connects to the rabbit ears screws? Please let me know asap if you can.

    Thank you for your time

    Tim

  5. Robert Tan | June 3rd, 2009 at 4:09 pm

    Hi 9w2WTF,
    First of all great job on your site.It is wonderful.
    I would like to share with you how to increase the computer PSU power supply to 13.8VDC there is one simple modification .Which i can share with you.
    plus you need to add a resistor of 33ohm 5watt to the 5volt (red ) and black . It depend on the Resistor if you put lower the value the 12vdc output will increase but the resistor will be too hot. I would say 18ohmalso ive tried. You need to try and rnd yourself. Do email me so that i cant reply to you how to increase the 12VDC to 13.8VDC .Anyway all the best on the site . 73 9W2MTX.

  6. Robert Tan | June 3rd, 2009 at 4:11 pm

    Hi 9w2WTF,
    First of all great job on your site.It is wonderful.
    I would like to share with you how to increase the computer PSU power supply to 13.8VDC there is one simple modification .Which i can share with you.
    plus you need to add a resistor of 33ohm 5watt to the 5volt (red ) and black . It depend on the Resistor if you put lower the value the 12vdc output will increase but the resistor will be too hot. I would say 18ohmalso ive tried. You need to try and rnd yourself. Do email me so that i can reply to you how to increase the 12VDC to 13.8VDC .Anyway all the best on the site . 73 9W2MTX.

  7. guide | September 16th, 2009 at 4:22 am

    I like your website; I will share this with friends

  8. Kitty Abraham | September 19th, 2009 at 1:02 pm

    Dear site owner We are interested to increase traffic to your website, please get back to us in order to discuss the possibility in further detail. Thanks

  9. rid | November 5th, 2009 at 9:59 pm

    hello….i have a question about mobile rig…can we change vhf to uhf?….i hope to hear from you….thank you

  10. Paul Mitchell | January 1st, 2010 at 10:45 pm

    Hi 9W2WTF,

    I’m Paul, N1AUS / VK5PKM from OKLAHOMA, USA.

    I collect Ham Radio Car License Plates and noticed your sticker.

    I was wondering 3 things:

    1. Am I able to get a sticker of your callsign to add to my collection?

    2. Does Malaysia have Ham Radio Car License Plates at all that they issue?

    3. Do all Malaysia Hams have these stickers available to them?

    Thanks for your time and Happy New Year for 2010 !

    Paul – N1AUS / VK5PKM

  11. George Nau | May 24th, 2010 at 6:50 am

    Hello, I want to build your 6 element yagi to try to receive the International Space Station. My question is how is the driven element fed? Split with open line? gamma match? At 50 ohms I guess some kind of coax match. Any help would be greatly appreciated.
    Best Regards
    George Nau
    gnau@hvc.rr.com

  12. 9w2xxs | May 24th, 2010 at 2:53 pm

    salam bro..nak tanye sikit..tertarik sikit ngan post yagi 4 element 2 meter…berapa diameter tuk aluminium tube tu ek?? ke xkesah!!! saiz diameter mempengaruhi x die punye swr..maaf bro kalo mengganggu…sy budak baru belajar…kalo xkeberatan, fwd ke email sy k

    73/88 9w2xxs

  13. Ram | July 14th, 2010 at 4:53 pm

    Hi i learn alot from your website. The best is the culculations of the anthenna thanks bro keep up your good work. 73 bye

    Ram

  14. Howard, N4KYW | July 28th, 2010 at 1:45 am

    Dear Fellow Amateur,
    I have a question about the ten-meter loop antenna project. Referring to the balun near the point where the coax connects to the antenna: What does ‘3 gulugan berdiameter’ mean? Is the diameter of the balun 1 inch or 1 foot?
    Thanks and 73,
    Howard, N4KYW

Leave a Comment

Personal Blogs - BlogCatalog Blog Directory